Analisis Daya Dukung Base dengan Menggunakan Limbah Cangkang, Bottom Ash, dan Fly Ash Berdasarkan Uji CBR Laboratorium

Authors

  • Berkat Sinurat Sekolah tinggi teknologi dumai
  • Aidil Abrar Sekolah Tinggi Teknologi Dumai
  • Nuryasin Abdillah Sekolah Tinggi Teknologi Dumai

DOI:

https://doi.org/10.52072/slumptes.v2i2.639

Keywords:

Waste, CBR Test, Shell, Bottom Ash, Fly Ash

Abstract

One of the contributors to industrial waste in Indonesia is the Palm Oil Shell which produces a large amount of palm oil processing waste, and produces two types of waste, namely light ash (fly ash) and heavy ash (bottom ash). This test is carried out to calculate the amount of bearing capacity that can be received by the base made from waste comparisons, there are 4 comparisons different percentages, namely mixing 55% shell, 10% bottom ash and 35% fly ash, mixing 55% shell, 15% bottom ash and 30% fly ash, mixing 55% shell, 20% bottom ash and 25% fly ash, mixing 55% shell, 25% bottom ash and 20% fly ash. From the test results with different mixtures, the results obtained, that the mixture of 55% shell, 10% bottom ash and 35% fly ash, get the results of the bearing capacity for the base better than the other 3 mixtures, namely, mixing 55% shell, 15% bottom ash and 30% fly ash, mixing 55% shell, 20% bottom ash and 25% fly ash, mixing 55% shell, 25% bottom ash and 20% fly ash. This shows that with the same percentage of shell, the mixture with the addition of more fly ash than bottom ash has a better bearing capacity.

Downloads

Download data is not yet available.

References

Badan Standardisasi Nasional. (1989). SNI 03-1744-1989 Metode pengujian cbr laboratorium.

Badan Standardisasi Nasional. (2012). Metode uji CBR laboratorium SNI 1744:2012. Sni 1744; 2012, 1–28.

Hawari, F., & Lizar, L. (2021). Analisis Pengaruh Penggantian Filler Abu Sawit Fly Ash Dan Bottom Ash Terhadap Karakteristik Perkerasan Lentur (Ac-Wc). Jurnal TeKLA, 3(1), 1. https://doi.org/10.35314/tekla.v3i1.2007

Indriyati, T. S., Malik, A., & Alwinda, Y. (2019). Kajian Pengaruh Pemanfaatan Limbah Faba (Fly Ash Dan Bottom Ash) Pada Konstruksi Lapisan Base Perkerasan Jalan. Jurnal Teknik, 13(2), 112–119. https://doi.org/10.31849/teknik.v13i2.3168

Nely, A., Saputro, Y. A., & Rochmanto, D. (2022). Optimalisasi Campuran Fly Ash, Bottom Ash, dan Semen Untuk Lapis Pondasi (Improving Subgrade). Civil Engineering Study, 02, 1–6.

Rahmat, D., Yang, T., & Esa, M. (1999). Peraturan Pemerintah No.85 Tahun 1999 Tentang: Perubahan Atas Peraturan Pemerintah No 18 Tahun 1999 Tentang Pengelolaan Limbah Bahan Berbahaya Dan Beracun.

Rinaldi, Ade and Abdillah, Nuryasin and Abrar, Aidil (2020) Penggunaan campuran limbah abu cangkang sawit (palm oil fuel ash) dan kapur (caco3) sebagai stabilisasi tanah gambut. Final project of Sekolah Tinggi Teknologi Dumai.

Rismawati, M. S., & Rismawati, M. S. (2022). Pengaruh Penambahan Bottom Ash Sebagai Bahan Stabilisasi Tanah Gambut Terhadap Nilai CBR. Jurnal Teknik Sipil Dan Teknologi Konstruksi, 8(1), 47–59. https://doi.org/10.35308/jts-utu.v8i1.5019

Suparyanto dan Rosad (2015. (2020). Rencana Pengkerasan Jalan. In Suparyanto dan Rosad (2015 (Vol. 5, Issue 3).

Yuliana, Alviza and Abrar, Aidil and Abdillah, Nuryasin (2019) Pemanfaatan pemakaian limbah abu cangkang kelapa sawit (acks) pada campuran aspal ac-wc ditinjau dari stabilitas. Final project of Sekolah Tinggi Teknologi Dumai.

Downloads

Published

2024-01-15